Portable Power – When you need it, Where you need it –
Power everywhere. Much more than just a battery and it is built in Canada. Complete customization, Portability, power, and convenience come together in this versatile power station. Optional 1000W pure sine wave inverter and MPPT/DC2DC charge controller make the Power N Go unmatched. Our smart Bluetooth BMS lets you know whatâs going on at all times which comes standard with all units. LiFePO4 is some of the longest-lasting and safest lithium chemistries.
Features
The power station has a long list of features including an optional built-in 1000W (2000W peak) pure sine wave inverter to power all your AC devices on the go. Another option is the all-in-one 300W MPPT charge controller and 30A DC2DC converter and isolator. To plugin there is 1x SMH175 & 4x SMH50 Anderson connectors, 2x 12V automotive ports, 2x 2.1A USB. A hard cut-off switch and battery state indicator are built-in for quick disconnection and convenience.
Capacity
Using four of our high capacity 3.2V 310Ah prismatic cells translates into more reliability; fewer parts, fewer issues. Our cells are designed to use the full depth of discharge giving maximum capacity when required. You always have the option (through Bluetooth) to change the charging and discharging parameters to a 20%-90% cycle to extend the lifetime of the battery. Compared to lead-acid, lithium offers more than 2x more power per rated Ah as well as consistent voltage.
Cycle Life
If you use a full cycle daily, it will be 8-13.5 years until you realize a 20% capacity loss. This means with the 310Ah, after 3000 â 5000 cycles you would still have up to 248Ah of usable power. The battery can easily have a useful life of more than 10,000 cycles/25 years in most applications. This is the only battery you will need, which is why we include our 10-year warranty but do expect it to run much longer.
Smart BMS
Lithium batteries require a battery management system (BMS) to ensure proper voltage and temperature cut-offs. Separating our batteries with our smart Bluetooth BMS, you can set parameters of charging and discharging, monitor real-time usage, see available power left, and turn on and off all from your phone. At any time, you will know how much power youâre discharging or charging and how much you have left. The BMS has automatic high/low temp and voltage cut-offs to maximize your battery life. We use quality JBD BMS for our Power N Go power stations.
Temperature
LiFePO4 chemistry cannot be charged at 0 °C or discharged at -20 °C which is why our BMS disable these functions when low temperatures are detected. Depending on your battery location and climate, you may require your battery to work in colder weather. Our batteries can come with built-in automatic heating. The optional heater can keep the battery temperature above 0 °C to allow all functions to work in any weather. The heater uses very little power to keep everything warm.
Amp Rates
Our smart BMS is rated to output 150A continuous with a 300a peak (3 seconds) and charging up to 150A continuously. By paralleling units, you can multiply amperage rates by number of paralleled batteries. Please gauge your wiring accordingly to account for your expected loads.
Safety
The most important thing to all our batteries is safety. LiFePO4 is one of the safest lithium chemistries and will not catch on fire like other li-ion batteries. There is no venting or required maintenance with these batteries. Storage losses are under 3% per month so you can leave the battery dormant for long periods without issues.
Parallel/Series
Our Power N Go is capable of up to 4 series and 4 paralleled batteries. With series connections, the inverter or MPPT/DC2DC cannot be built in. If you require a specific voltage and Ah, please see our King-Pawn battery system for a single BMS option for multiple batteries. We also offer a more basic 4kWh option with terminals called the Tiny 12V. If you require more capacity, voltage, or anything else please contact us directly as we can do anything!
Documents